If you have ever tried to start your car and it did not make a sound, you may already know how horrific it is for your car battery to die. In some cases, you may be able to recover relatively quickly if you have your own battery car charger in the back of your car. Or, if you have battery cables in your vehicle and another car to supply the charge, you can be up and running again in no time. On the other hand, if any of these 2 options are not available to you, you may be sitting for a long time until you can obtain the help that you need. In either case, to prevent these problems from ever really happening again, here are some car battery maintenance tips that can help you to prevent these issues from occurring.
1. Clean Your Battery Regularly
To get the best performance out of your battery, you need to make sure that you clean your battery regularly. For instance, over time corrosion can build up on the post and other surface areas. The corrosion on the post will reduce your battery’s performance to a minimal. In fact, in some cases, the build-up is the actual reason why your vehicle will not start, especially since this corrosion makes it more difficult for the battery to connect.
2. Keep your Battery Warm
When you want to protect the condition of your battery, you need to know what you can do to maintain it properly. Therefore, as you make your plans to keep your battery at the highest quality possible, it is important that you understand how to keep the battery from cold temperatures in the winter months. For instance, instead of leaving your car out on the side of the curb, you need to park the vehicle inside your garage instead.
3. Protect the Battery with Insulation
Another key to keeping your battery maintained well throughout the years is protecting it with insulation. Battery insulation wrap is made by manufacturers to keep the battery from being adversely affected by any excessive heat and cold that comes from a hot engine. When you buy and install insulation wrap you can also extend the life of your battery.
4. Make sure the Battery is Always Placed and Situated firmly in its Protective Shield
You should never do a quick and dirty job installing a new or old battery in your car. Even though you may be in a hurry, there are some steps in the process of the installation that cannot be missed or left out. One of the most important is placing the protective shield around the battery to keep in its appropriate place at all times. If you do not complete this step correctly, your car may cut off completely while driving due to a weak connection. For more info on this topic, visit ASAPRoadworthys.com.au.
5. Add Water
To help in maintaining the proper charge, the battery must have a healthy equilibrium. You can take care of this part of maintaining your battery by adding distilled water to your battery. This kind of process is needed for those batteries that are not considered to be maintenance-free. When you can add water at the level that it should be, you can also prevent damaged cells that lessen the battery’s life.
6. Make Use of the Power of the Sun – with a Solar charger
If your vehicle will be sitting idle in your driveway for long periods of time, you may want to buy a solar charger. These chargers have been designed for a number of different key purposes, included serving as independent energy that is also renewable.
7. Make sure you know the signs of a Dying Battery
If you want to make sure to maintain your battery properly, you need to know the signs of a dying battery. For instance, if your lights are remaining dim when you idle your vehicle but brightens up as you rev up the engine, your battery may be breaking down.
8. Clean the Battery Tray
You should make sure that the tray that holds the battery remains clean at all times, too. Because dirt and buildup from the tray can also affect its performance, you should clean the battery and the tray.